Enclosures with exact inner dimensions
Tell it the board size and it builds the box around it — walls, floor, corner holes.
Digital file without physical validation. You print and check fit and strength. Not for structural or safety-critical uses.
- Inner or outer dimensions, your call
- Mounting holes where you say
- Pairs with a separate lid request
Example prompt: “Electronics project box 80x50x30mm with 3mm walls and two M3 corner holes”
How it works
Type what you need in plain words — sizes in millimetres if you have them. STLsmith's AI converts it into parametric geometry with FDM rules baked in (2mm minimum walls, real M3–M5 screw clearances). Preview it in 3D, refine by chatting (“5mm wider”, “M5 instead of M4”), and download the STL for Cura, PrusaSlicer, Bambu Studio or any other slicer. Check supports there before printing.
What you can set
Every dimension is yours to choose: overall size, thickness, hole diameters and positions, counts and spacing. Custom AI generation requires a paid pack: 100 credits for USD 9. Each generation or refinement uses one credit. Fixed examples are available for inspection.
Frequently asked
Is the project boxes STL free to download?
Custom generation is paid. The pack is USD 9 for 100 credits; downloading an already generated file does not spend another credit.
Can I set exact dimensions?
Yes. Describe sizes in millimetres in the prompt, then refine in chat until the preview matches what you need.