Brackets sized to the job
Light-duty shelf and panel brackets with the hole pattern you need. PETG recommended for load.
Digital file without physical validation. You print and check fit and strength. Not for structural or safety-critical uses.
- Any leg lengths and thickness
- Your screw pattern, real clearances
- Tip: print in PETG, 50%+ infill for load
Example prompt: “L-shaped shelf bracket 60x60mm, 4mm thick, two M4 holes per side”
How it works
Type what you need in plain words — sizes in millimetres if you have them. STLsmith's AI converts it into parametric geometry with FDM rules baked in (2mm minimum walls, real M3–M5 screw clearances). Preview it in 3D, refine by chatting (“5mm wider”, “M5 instead of M4”), and download the STL for Cura, PrusaSlicer, Bambu Studio or any other slicer. Check supports there before printing.
What you can set
Every dimension is yours to choose: overall size, thickness, hole diameters and positions, counts and spacing. Custom AI generation requires a paid pack: 100 credits for USD 9. Each generation or refinement uses one credit. Fixed examples are available for inspection.
Frequently asked
Is the shelf brackets STL free to download?
Custom generation is paid. The pack is USD 9 for 100 credits; downloading an already generated file does not spend another credit.
Can I set exact dimensions?
Yes. Describe sizes in millimetres in the prompt, then refine in chat until the preview matches what you need.